Module: Multilanguage Support for Gallery3

gopu

Joined: 2009-08-28
Posts: 137

Posted: Mon, 2012-01-09 18:35

SoosKriszta, that's not my list anymore as there much more high pri stuff that I need to do and I am finding difficult to accommodate those.

--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

Dogen

Joined: 2012-01-09
Posts: 10

Posted: Tue, 2012-01-10 09:43

Hi gopu,
I sent you login access to my gallery at http://gallery.kbb1.com/index.php/arvut

Thank you for help

Dogen

gopu

Joined: 2009-08-28
Posts: 137

Posted: Tue, 2012-01-10 10:42

hi Dogen,

I could not reproduce any problem.
Please note that, had to change it to default theme to try out for my own convenience. Please revert back to your preferred theme.

One thing that you should note here that unless you add multilingual entry for parent, there is no point in adding entry for child items.
I have seen that happening with gallery.

If you can reproduce it again, please mention step by step that can be reproduced with default theme.
If it works for you then we will know that module and theme are not compatible to each other.

-gopu

--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

Dogen

Joined: 2012-01-09
Posts: 10

Posted: Tue, 2012-01-10 11:28

Hi gopu,
I'll try steb-by-step description:
1. Set GreyDragon theme (If you are using GreyDragon theme you'll see the exception)
2. Go to http://gallery.kbb1.com/index.php/arvut
3. You'll see some of thumbs displayed as "empty" images and some displayed normal. The "Empty" images are images where multilanguage was added.
4. Go to http://gallery.kbb1.com/var/thumbs/arvut/photo_norav_arvut_2011-08-16_shulhan-agol_abitton_n016.jpg?m=1324957669 (URL of first thumb in the page)
5. You'll see "big" image that empty
6. Click on "big" picture -> If you are using GreyDragon theme you'll see the exception, in other cases it still displays "empty" image.

P.S: Disabling multilanguage plugin causes all the thumbs in http://gallery.kbb1.com/index.php/arvut be displayed normally.

Thank you!
Dogen

gopu

Joined: 2009-08-28
Posts: 137

Posted: Tue, 2012-01-10 17:54

Hello Dogen,

I have noticed that this happens only when no language is selected in language bar.
Did you change the default language recently?

-gopu
--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

Dogen

Joined: 2012-01-09
Posts: 10

Posted: Wed, 2012-01-11 04:41

Hello gopu,
I never set language prefernce for my user before.
I selected default language now and it worked for me. Thank you!
But still looks like there is a bug somewhere.
Where do you think may be the problem?

Dogen

gopu

Joined: 2009-08-28
Posts: 137

Posted: Wed, 2012-01-11 15:38

Dogen,

What you changed is user preference language (through the drop down)
As an admin one can set the Default Language. See in settings.

If you have imported from Gallery2 to Gallery3... it's important that the the Default language in both the case are same.
In your current Gallery3, the default lang is English.

In your case possibly
Either you have different default language in Gallery 2 than Gallery 3
Or you have changed the Default language in between.

During the installation of multilang module you might have observed that there is warning that Default Language should not be changed.

-gopu

--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

Dogen

Joined: 2012-01-09
Posts: 10

Posted: Sat, 2012-01-14 08:51

Great,
Thank you for help!

Dogen

krikman

Joined: 2011-02-22
Posts: 24

Posted: Mon, 2012-04-02 09:29

Hello Gopu.

I accidently switched off Multilang module and cannot swich it back on. Can you help what modules required to install correctly?
Default language was and is Ru, additional is En-UK.

http:\\photo.marktim.ru

krikman

Joined: 2011-02-22
Posts: 24

Posted: Mon, 2012-04-02 12:43

hello Gupu!

That is gallery log fragment:

2012-04-02 16:34:23 +04:00 --- error: exception 'Exception' with message '@todo MODULE_FAILED_TO_UPGRADE' in /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/modules/gallery/helpers/module.php:243 Stack trace: #0 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/modules/gallery/controllers/admin_modules.php(92): module_Core::upgrade('multilang3') #1 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/modules/gallery/controllers/admin_modules.php(54): Admin_Modules_Controller->_do_save() #2 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/modules/gallery/controllers/admin.php(62): Admin_Modules_Controller->confirm() #3 [internal function]: Admin_Controller->__call(Array, Array) #4 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/system/core/Kohana.php(331): ReflectionMethod->invokeArgs('modules', Array) #5 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/system/core/Event.php(208): Kohana_Core::instance(Object(Admin_Controller), Array) #6 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/application/Bootstrap.php(67): Event_Core::run(NULL) #7 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/index.php(102): require('/home/virtwww/w...') #8 {main}

http://photo.marktim.ru

gopu

Joined: 2009-08-28
Posts: 137

Posted: Mon, 2012-04-02 15:16

I would need your g3 admin credential to do it

-gopu
--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

krikman

Joined: 2011-02-22
Posts: 24

Posted: Mon, 2012-04-02 19:05

I send you private message thru this board

http://photo.marktim.ru

diapason

Joined: 2012-04-03
Posts: 4

Posted: Tue, 2012-04-03 11:07

hello.
firstly, thanks for such useful idea.
secondly: i know everybody is using this module without any problem.
but for me: when i activate the module, all the gallery goes BOOM! nothing works, no page opens, even admin pages and all addresses become just blank pages. i checked pages code using firefox, but codes are blank too and contain nothing. the only solution to make everything work is to delete module folder using ftp access.
is this my wrong or something else?

thanks.

gopu

Joined: 2009-08-28
Posts: 137

Posted: Tue, 2012-04-03 12:49

diapason, what's the gallery version are you using?
do you have TAG module enabled?

--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

diapason

Joined: 2012-04-03
Posts: 4

Posted: Tue, 2012-04-03 14:29

hello gopu.
thanks for reply.
i am using Gallery 3.0.2 and yes. Tag module is enabled.
all the problem starts over after copying multilang3.2.3.

also i installed fresh copy of gallery on a test subdomain. and installed this module just after that. but problem exists!

gopu

Joined: 2009-08-28
Posts: 137

Posted: Tue, 2012-04-03 14:54

The TAG module should be enabled ...
Can you send the log files ? I think its under var/log folder
--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

diapason

Joined: 2012-04-03
Posts: 4

Posted: Tue, 2012-04-03 15:12

you can download all the log at: http://gallery.shamshirian.ir/log.zip
the file: 2012-03-23.log.php contains something about this module.

gopu

Joined: 2009-08-28
Posts: 137

Posted: Fri, 2012-04-06 19:59

@diapason, first you need to ensure that you have enough data size limit for your DB. Check whether you have already met the DB max limit.
If you have checked and sure that its within the max limit (allowed by your hosting company) then
for further diagnose I need gallery admin access
too can do it... try activating/deactivating TAG related modules.

--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

diapason

Joined: 2012-04-03
Posts: 4

Posted: Sat, 2012-04-07 08:10

hello gopu.
i tested it, but
and no problem with database size limit. the gallery is new and database is not so huge. it's just 7mb.
if you have time (just if you have) username and passwords to anywhere needed is PMed.

djtropez

Joined: 2011-06-22
Posts: 31

Posted: Sat, 2012-09-08 12:09

hi, i have a problem i can't see the tag field in the multilanguage form.....anybody have somes suggestions

gopu

Joined: 2009-08-28
Posts: 137

Posted: Sat, 2012-09-08 13:05

It seems you have not installed the latest version.

Please install it from here: http://gallery.menalto.com/files/multilang3_4.0.zip

--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

djtropez

Joined: 2011-06-22
Posts: 31

Posted: Sun, 2012-09-09 09:27

thanks but i try yo install the latest version but i receve an error

gopu

Joined: 2009-08-28
Posts: 137

Posted: Sun, 2012-09-09 17:35

How did you install the new version? did you do a upgrade?

--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

djtropez

Joined: 2011-06-22
Posts: 31

Posted: Sun, 2012-09-09 19:11

no, I have cancelled the old module and i'm trying to install the new one.

gopu

Joined: 2009-08-28
Posts: 137

Posted: Sun, 2012-09-09 19:27

in such case you need ensure that the old multilang first needs to be deactivated and then deleted which will uninstall the old multilang.
if you dont do that the new installation will not work as the old tables are still there.

--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

djtropez

Joined: 2011-06-22
Posts: 31

Posted: Sun, 2012-09-09 20:11

i delete the old table in my database but i don't remember if i deactivated and then delete the module. i have encore the same problem how i can install the module? where i can see if there are other parts of the old multilanguage?

thanks

gopu

Joined: 2009-08-28
Posts: 137

Posted: Sun, 2012-09-09 21:02

Uninstall does the following things.
Make sure these are done.

Quote:

static function uninstall() {
$db = Database::instance();
$default_locale = module::get_var("gallery", "default_locale");

$db->query("DROP TABLE IF EXISTS {multilang_items};");
$db->query("ALTER TABLE {tags} DROP UNIQUE `name-locale` ( `name` , `locale` )");
$db->query("ALTER TABLE {tags} DROP `locale`");
$db->query("ALTER TABLE {tags} ADD INDEX name");

module::delete("multilang3");
}

--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

djtropez

Joined: 2011-06-22
Posts: 31

Posted: Wed, 2012-09-12 16:22

I don't believe to have understood..... what should I do with what you have written me? thanks for the help!

gopu

Joined: 2009-08-28
Posts: 137

Posted: Wed, 2012-09-12 16:51

Since you could delete the multilang_items table, i assume you know how to run SQL query:
Run following SQL query in your Gallery3 DB:

Quote:

DROP TABLE IF EXISTS {multilang_items}
ALTER TABLE {tags} DROP UNIQUE `name-locale` ( `name` , `locale` )
ALTER TABLE {tags} DROP `locale`
ALTER TABLE {tags} ADD INDEX name

replace {multilang_items} and {tags} with tags and multilang_items table name in your Gallery3 DB.
Its generally preceded with <g3_prefix>, whatever prefix you would have chosen during the installation.

djtropez

Joined: 2011-06-22
Posts: 31

Posted: Thu, 2012-09-13 14:53

no i can't install the module..... i don't know how i can do........

gopu

Joined: 2009-08-28
Posts: 137

Posted: Thu, 2012-09-13 17:11

if you provide me the admin access to your site, i can look into it.

djtropez

Joined: 2011-06-22
Posts: 31

Posted: Thu, 2012-09-13 17:27

but i'm working in local whit easy php we can do a remote connection with teamviewer?

gopu

Joined: 2009-08-28
Posts: 137

Posted: Thu, 2012-09-13 17:55

lets take it offline... PM with your Gallery3 logs
The logs are present in var/logs

--------------------------------------------------------------------------------
my wings of love - work, experince, learnings, open source, technologies on my way to God

djtropez

Joined: 2011-06-22
Posts: 31

Posted: Fri, 2012-09-14 05:19

i'm sorry but i need to have more explication about what i must do
i must going into the folder var/logs of gallery menalto?
and after?
thank you very much!

gopu

Joined: 2009-08-28
Posts: 137

Posted: Fri, 2012-09-14 06:45

You need to send me the logs file present in var/logs folder of your gallery3 installation.
Goto your folder where you have installed gallery3.
- Look for subfolder var.
- Under var, look for subfolder logs
- Zip these files and send it to me

This will give me an indication to what's going wrong in your setup.

djtropez

Joined: 2011-06-22
Posts: 31

Posted: Fri, 2012-09-14 06:54

ok but you can give me an email? i can't send the zip file trought the site

djtropez

Joined: 2011-06-22
Posts: 31

Posted: Mon, 2012-09-17 11:53

hey gopu you have understand because i can't install your module?

nzsolar

Joined: 2012-09-25
Posts: 1

Posted: Tue, 2012-09-25 04:40

Hi Gopu,

Can you please explain how to enable multilang sidebar?

I am having issues uploading with it disabled...

gopu

Joined: 2009-08-28
Posts: 137

Posted: Tue, 2012-09-25 04:50

Goto Appearance->Manage Sidebar
and then choose "Localized Sidebar" by dragging it to right

THAIS ESCALONA

Joined: 2012-10-01
Posts: 1

Posted: Mon, 2012-10-01 18:34

Hi!
Thank you all for the information provided, the truth has been very useful and much more useful the module.
I love that we can share important information ;)

gopu

Joined: 2009-08-28
Posts: 137

Posted: Mon, 2012-10-01 18:51

Quote:

Thank you all for the information provided, the truth has been very useful and much more useful the module.
I love that we can share important information ;)

i am glad that it has been useful

SilentHunter

Joined: 2012-04-25
Posts: 4

Posted: Fri, 2012-11-09 10:58

Hello,

first big thanks for that module!! I have a question: does the multilanguage module support the "static pages" module and the tag cloud module? If yes, how do it edit the entries?

And where do i find the edit for the default gallery tags? Thank you!!!

Kind regards,
SilentHunter
________________________
Vault 114 - Urban Exploration

pinoepel

Joined: 2011-03-22
Posts: 10

Posted: Wed, 2013-03-06 23:05

hello, thank you für the module - i have a small bug, if i translate the album, the new paths are not saved consequently, first they work, at second click the path is changed to the root url. i noticed, that the value is deleted in the db... can u help here?

DamienA

Joined: 2003-05-25
Posts: 203

Posted: Sun, 2013-03-31 02:59

Hello, Thank you for this module. I just installed it on Gallery 3.0.6

I checked that it installed, went to admin/Gallery 2 import, the file path to Gallery2 was already there. In the Import window it said: It looks like you've imported the following Gallery 2 data already:...

Anyway, I clicked on Begin import. The import started but stopped with this error:

@todo G2_FUNCTION_FAILED

Here is the error log:

It looks like you've imported the following Gallery 2 data already:

Task Import from Gallery 2 started (task id 17)
Group 'Admin' does not exist in Gallery 3, skipping
User with id: 5 already imported, skipping
User with id: 6 already imported, skipping
User with id: 14 already imported, skipping
User with id: 15 already imported, skipping
User with id: 16 already imported, skipping
exception 'Exception' with message '@todo G2_FUNCTION_FAILED' in /home/cambodia/public_html/gallery3/modules/g2_import/helpers/g2_import.php:1368
Stack trace:
#0 /home/cambodia/public_html/gallery3/modules/multilang3/helpers/MY_g2_import.php(57): g2(Array)
#1 /home/cambodia/public_html/gallery3/modules/multilang3/helpers/MY_g2_import.php(47): g2_import::g2_multilang_import(7, '1')
#2 /home/cambodia/public_html/gallery3/modules/g2_import/helpers/g2_import_task.php(137): g2_import::import_album(Array)
#3 [internal function]: g2_import_task_Core::import(Object(Task_Model))
#4 /home/cambodia/public_html/gallery3/modules/gallery/helpers/task.php(90): call_user_func_array('g2_import_task:...', Array)
#5 /home/cambodia/public_html/gallery3/modules/gallery/controllers/admin_maintenance.php(195): task_Core::run('17')
#6 [internal function]: Admin_Maintenance_Controller->run('17')
#7 /home/cambodia/public_html/gallery3/modules/gallery/controllers/admin.php(62): call_user_func_array(Array, Array)
#8 [internal function]: Admin_Controller->__call('maintenance', Array)
#9 /home/cambodia/public_html/gallery3/system/core/Kohana.php(331): ReflectionMethod->invokeArgs(Object(Admin_Controller), Array)
#10 [internal function]: Kohana_Core::instance(NULL)
#11 /home/cambodia/public_html/gallery3/system/core/Event.php(208): call_user_func_array(Array, Array)
#12 /home/cambodia/public_html/gallery3/application/Bootstrap.php(67): Event_Core::run('system.execute')
#13 /home/cambodia/public_html/gallery3/index.php(116): require('/home/cambodia/...')
#14 {main}

DamienA

Joined: 2003-05-25
Posts: 203

Posted: Mon, 2013-04-15 08:39

I solved the import problem by changing the name of the module from multilang3 to multilang.

DamienA

Joined: 2003-05-25
Posts: 203

Posted: Mon, 2013-04-15 09:05

To get the module "working" I had to change the name of the module folder on my server from multilang3 to multilang.

I discovered that with the folder renamed multilang would appear in the sidebar but:

1/ There is no contextual menu (multilang edit) that I can click on for each picture.
2/ The sidebar appears but the flag icons do not show up

If I change the name back to multilang3 the sidebar disappears.

So there seems to be an issue with paths, in my situation...

Anyone have any ideas?

gopu Joined: 2009-08-28 Posts: 137	Posted: Mon, 2012-01-09 18:35
	SoosKriszta, that's not my list anymore as there much more high pri stuff that I need to do and I am finding difficult to accommodate those. -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

Dogen Joined: 2012-01-09 Posts: 10	Posted: Tue, 2012-01-10 09:43
	Hi gopu, I sent you login access to my gallery at http://gallery.kbb1.com/index.php/arvut Thank you for help Dogen

gopu Joined: 2009-08-28 Posts: 137	Posted: Tue, 2012-01-10 10:42
	hi Dogen, I could not reproduce any problem. Please note that, had to change it to default theme to try out for my own convenience. Please revert back to your preferred theme. One thing that you should note here that unless you add multilingual entry for parent, there is no point in adding entry for child items. I have seen that happening with gallery. If you can reproduce it again, please mention step by step that can be reproduced with default theme. If it works for you then we will know that module and theme are not compatible to each other. -gopu -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

Dogen Joined: 2012-01-09 Posts: 10	Posted: Tue, 2012-01-10 11:28
	Hi gopu, I'll try steb-by-step description: 1. Set GreyDragon theme (If you are using GreyDragon theme you'll see the exception) 2. Go to http://gallery.kbb1.com/index.php/arvut 3. You'll see some of thumbs displayed as "empty" images and some displayed normal. The "Empty" images are images where multilanguage was added. 4. Go to http://gallery.kbb1.com/var/thumbs/arvut/photo_norav_arvut_2011-08-16_shulhan-agol_abitton_n016.jpg?m=1324957669 (URL of first thumb in the page) 5. You'll see "big" image that empty 6. Click on "big" picture -> If you are using GreyDragon theme you'll see the exception, in other cases it still displays "empty" image. P.S: Disabling multilanguage plugin causes all the thumbs in http://gallery.kbb1.com/index.php/arvut be displayed normally. Thank you! Dogen

gopu Joined: 2009-08-28 Posts: 137	Posted: Tue, 2012-01-10 17:54
	Hello Dogen, I have noticed that this happens only when no language is selected in language bar. Did you change the default language recently? -gopu -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

Dogen Joined: 2012-01-09 Posts: 10	Posted: Wed, 2012-01-11 04:41
	Hello gopu, I never set language prefernce for my user before. I selected default language now and it worked for me. Thank you! But still looks like there is a bug somewhere. Where do you think may be the problem? Dogen

gopu Joined: 2009-08-28 Posts: 137	Posted: Wed, 2012-01-11 15:38
	Dogen, What you changed is user preference language (through the drop down) As an admin one can set the Default Language. See in settings. If you have imported from Gallery2 to Gallery3... it's important that the the Default language in both the case are same. In your current Gallery3, the default lang is English. In your case possibly Either you have different default language in Gallery 2 than Gallery 3 Or you have changed the Default language in between. During the installation of multilang module you might have observed that there is warning that Default Language should not be changed. -gopu -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

Dogen Joined: 2012-01-09 Posts: 10	Posted: Sat, 2012-01-14 08:51
	Great, Thank you for help! Dogen

krikman Joined: 2011-02-22 Posts: 24	Posted: Mon, 2012-04-02 09:29
	Hello Gopu. I accidently switched off Multilang module and cannot swich it back on. Can you help what modules required to install correctly? Default language was and is Ru, additional is En-UK. http:\\photo.marktim.ru

krikman Joined: 2011-02-22 Posts: 24	Posted: Mon, 2012-04-02 12:43
	hello Gupu! That is gallery log fragment: 2012-04-02 16:34:23 +04:00 --- error: exception 'Exception' with message '@todo MODULE_FAILED_TO_UPGRADE' in /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/modules/gallery/helpers/module.php:243 Stack trace: #0 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/modules/gallery/controllers/admin_modules.php(92): module_Core::upgrade('multilang3') #1 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/modules/gallery/controllers/admin_modules.php(54): Admin_Modules_Controller->_do_save() #2 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/modules/gallery/controllers/admin.php(62): Admin_Modules_Controller->confirm() #3 [internal function]: Admin_Controller->__call(Array, Array) #4 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/system/core/Kohana.php(331): ReflectionMethod->invokeArgs('modules', Array) #5 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/system/core/Event.php(208): Kohana_Core::instance(Object(Admin_Controller), Array) #6 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/application/Bootstrap.php(67): Event_Core::run(NULL) #7 /home/virtwww/w_marktim-ru_e2ca2ae3/http/photo/index.php(102): require('/home/virtwww/w...') #8 {main} http://photo.marktim.ru

gopu Joined: 2009-08-28 Posts: 137	Posted: Mon, 2012-04-02 15:16
	I would need your g3 admin credential to do it -gopu -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

krikman Joined: 2011-02-22 Posts: 24	Posted: Mon, 2012-04-02 19:05
	I send you private message thru this board http://photo.marktim.ru

diapason Joined: 2012-04-03 Posts: 4	Posted: Tue, 2012-04-03 11:07
	hello. firstly, thanks for such useful idea. secondly: i know everybody is using this module without any problem. but for me: when i activate the module, all the gallery goes BOOM! nothing works, no page opens, even admin pages and all addresses become just blank pages. i checked pages code using firefox, but codes are blank too and contain nothing. the only solution to make everything work is to delete module folder using ftp access. is this my wrong or something else? thanks.

gopu Joined: 2009-08-28 Posts: 137	Posted: Tue, 2012-04-03 12:49
	diapason, what's the gallery version are you using? do you have TAG module enabled? -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

diapason Joined: 2012-04-03 Posts: 4	Posted: Tue, 2012-04-03 14:29
	hello gopu. thanks for reply. i am using Gallery 3.0.2 and yes. Tag module is enabled. all the problem starts over after copying multilang3.2.3. also i installed fresh copy of gallery on a test subdomain. and installed this module just after that. but problem exists!

gopu Joined: 2009-08-28 Posts: 137	Posted: Tue, 2012-04-03 14:54
	The TAG module should be enabled ... Can you send the log files ? I think its under var/log folder -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

diapason Joined: 2012-04-03 Posts: 4	Posted: Tue, 2012-04-03 15:12
	you can download all the log at: http://gallery.shamshirian.ir/log.zip the file: 2012-03-23.log.php contains something about this module.

gopu Joined: 2009-08-28 Posts: 137	Posted: Fri, 2012-04-06 19:59
	@diapason, first you need to ensure that you have enough data size limit for your DB. Check whether you have already met the DB max limit. If you have checked and sure that its within the max limit (allowed by your hosting company) then for further diagnose I need gallery admin access too can do it... try activating/deactivating TAG related modules. -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

diapason Joined: 2012-04-03 Posts: 4	Posted: Sat, 2012-04-07 08:10
	hello gopu. i tested it, but and no problem with database size limit. the gallery is new and database is not so huge. it's just 7mb. if you have time (just if you have) username and passwords to anywhere needed is PMed.

djtropez Joined: 2011-06-22 Posts: 31	Posted: Sat, 2012-09-08 12:09
	hi, i have a problem i can't see the tag field in the multilanguage form.....anybody have somes suggestions

gopu Joined: 2009-08-28 Posts: 137	Posted: Sat, 2012-09-08 13:05
	It seems you have not installed the latest version. Please install it from here: http://gallery.menalto.com/files/multilang3_4.0.zip -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

djtropez Joined: 2011-06-22 Posts: 31	Posted: Sun, 2012-09-09 09:27
	thanks but i try yo install the latest version but i receve an error

gopu Joined: 2009-08-28 Posts: 137	Posted: Sun, 2012-09-09 17:35
	How did you install the new version? did you do a upgrade? -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

djtropez Joined: 2011-06-22 Posts: 31	Posted: Sun, 2012-09-09 19:11
	no, I have cancelled the old module and i'm trying to install the new one.

gopu Joined: 2009-08-28 Posts: 137	Posted: Sun, 2012-09-09 19:27
	in such case you need ensure that the old multilang first needs to be deactivated and then deleted which will uninstall the old multilang. if you dont do that the new installation will not work as the old tables are still there. -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

djtropez Joined: 2011-06-22 Posts: 31	Posted: Sun, 2012-09-09 20:11
	i delete the old table in my database but i don't remember if i deactivated and then delete the module. i have encore the same problem how i can install the module? where i can see if there are other parts of the old multilanguage? thanks

gopu Joined: 2009-08-28 Posts: 137	Posted: Sun, 2012-09-09 21:02
	Uninstall does the following things. Make sure these are done. Quote: static function uninstall() { $db = Database::instance(); $default_locale = module::get_var("gallery", "default_locale"); $db->query("DROP TABLE IF EXISTS {multilang_items};"); $db->query("ALTER TABLE {tags} DROP UNIQUE `name-locale` ( `name` , `locale` )"); $db->query("ALTER TABLE {tags} DROP `locale`"); $db->query("ALTER TABLE {tags} ADD INDEX name"); module::delete("multilang3"); } -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

djtropez Joined: 2011-06-22 Posts: 31	Posted: Wed, 2012-09-12 16:22
	I don't believe to have understood..... what should I do with what you have written me? thanks for the help!

gopu Joined: 2009-08-28 Posts: 137	Posted: Wed, 2012-09-12 16:51
	Since you could delete the multilang_items table, i assume you know how to run SQL query: Run following SQL query in your Gallery3 DB: Quote: DROP TABLE IF EXISTS {multilang_items} ALTER TABLE {tags} DROP UNIQUE `name-locale` ( `name` , `locale` ) ALTER TABLE {tags} DROP `locale` ALTER TABLE {tags} ADD INDEX name replace {multilang_items} and {tags} with tags and multilang_items table name in your Gallery3 DB. Its generally preceded with <g3_prefix>, whatever prefix you would have chosen during the installation.

djtropez Joined: 2011-06-22 Posts: 31	Posted: Thu, 2012-09-13 14:53
	no i can't install the module..... i don't know how i can do........

gopu Joined: 2009-08-28 Posts: 137	Posted: Thu, 2012-09-13 17:11
	if you provide me the admin access to your site, i can look into it.

djtropez Joined: 2011-06-22 Posts: 31	Posted: Thu, 2012-09-13 17:27
	but i'm working in local whit easy php we can do a remote connection with teamviewer?

gopu Joined: 2009-08-28 Posts: 137	Posted: Thu, 2012-09-13 17:55
	lets take it offline... PM with your Gallery3 logs The logs are present in var/logs -------------------------------------------------------------------------------- my wings of love - work, experince, learnings, open source, technologies on my way to God

djtropez Joined: 2011-06-22 Posts: 31	Posted: Fri, 2012-09-14 05:19
	i'm sorry but i need to have more explication about what i must do i must going into the folder var/logs of gallery menalto? and after? thank you very much!

gopu Joined: 2009-08-28 Posts: 137	Posted: Fri, 2012-09-14 06:45
	You need to send me the logs file present in var/logs folder of your gallery3 installation. Goto your folder where you have installed gallery3. - Look for subfolder var. - Under var, look for subfolder logs - Zip these files and send it to me This will give me an indication to what's going wrong in your setup.

djtropez Joined: 2011-06-22 Posts: 31	Posted: Fri, 2012-09-14 06:54
	ok but you can give me an email? i can't send the zip file trought the site

djtropez Joined: 2011-06-22 Posts: 31	Posted: Mon, 2012-09-17 11:53
	hey gopu you have understand because i can't install your module?

nzsolar Joined: 2012-09-25 Posts: 1	Posted: Tue, 2012-09-25 04:40
	Hi Gopu, Can you please explain how to enable multilang sidebar? I am having issues uploading with it disabled...

gopu Joined: 2009-08-28 Posts: 137	Posted: Tue, 2012-09-25 04:50
	Goto Appearance->Manage Sidebar and then choose "Localized Sidebar" by dragging it to right

THAIS ESCALONA Joined: 2012-10-01 Posts: 1	Posted: Mon, 2012-10-01 18:34
	Hi! Thank you all for the information provided, the truth has been very useful and much more useful the module. I love that we can share important information ;)

gopu Joined: 2009-08-28 Posts: 137	Posted: Mon, 2012-10-01 18:51
	Quote: Thank you all for the information provided, the truth has been very useful and much more useful the module. I love that we can share important information ;) i am glad that it has been useful

SilentHunter Joined: 2012-04-25 Posts: 4	Posted: Fri, 2012-11-09 10:58
	Hello, first big thanks for that module!! I have a question: does the multilanguage module support the "static pages" module and the tag cloud module? If yes, how do it edit the entries? And where do i find the edit for the default gallery tags? Thank you!!! Kind regards, SilentHunter ________________________ Vault 114 - Urban Exploration

pinoepel Joined: 2011-03-22 Posts: 10	Posted: Wed, 2013-03-06 23:05
	hello, thank you für the module - i have a small bug, if i translate the album, the new paths are not saved consequently, first they work, at second click the path is changed to the root url. i noticed, that the value is deleted in the db... can u help here?

DamienA Joined: 2003-05-25 Posts: 203	Posted: Sun, 2013-03-31 02:59
	Hello, Thank you for this module. I just installed it on Gallery 3.0.6 I checked that it installed, went to admin/Gallery 2 import, the file path to Gallery2 was already there. In the Import window it said: It looks like you've imported the following Gallery 2 data already:... Anyway, I clicked on Begin import. The import started but stopped with this error: @todo G2_FUNCTION_FAILED Here is the error log: It looks like you've imported the following Gallery 2 data already: Task Import from Gallery 2 started (task id 17) Group 'Admin' does not exist in Gallery 3, skipping User with id: 5 already imported, skipping User with id: 6 already imported, skipping User with id: 14 already imported, skipping User with id: 15 already imported, skipping User with id: 16 already imported, skipping exception 'Exception' with message '@todo G2_FUNCTION_FAILED' in /home/cambodia/public_html/gallery3/modules/g2_import/helpers/g2_import.php:1368 Stack trace: #0 /home/cambodia/public_html/gallery3/modules/multilang3/helpers/MY_g2_import.php(57): g2(Array) #1 /home/cambodia/public_html/gallery3/modules/multilang3/helpers/MY_g2_import.php(47): g2_import::g2_multilang_import(7, '1') #2 /home/cambodia/public_html/gallery3/modules/g2_import/helpers/g2_import_task.php(137): g2_import::import_album(Array) #3 [internal function]: g2_import_task_Core::import(Object(Task_Model)) #4 /home/cambodia/public_html/gallery3/modules/gallery/helpers/task.php(90): call_user_func_array('g2_import_task:...', Array) #5 /home/cambodia/public_html/gallery3/modules/gallery/controllers/admin_maintenance.php(195): task_Core::run('17') #6 [internal function]: Admin_Maintenance_Controller->run('17') #7 /home/cambodia/public_html/gallery3/modules/gallery/controllers/admin.php(62): call_user_func_array(Array, Array) #8 [internal function]: Admin_Controller->__call('maintenance', Array) #9 /home/cambodia/public_html/gallery3/system/core/Kohana.php(331): ReflectionMethod->invokeArgs(Object(Admin_Controller), Array) #10 [internal function]: Kohana_Core::instance(NULL) #11 /home/cambodia/public_html/gallery3/system/core/Event.php(208): call_user_func_array(Array, Array) #12 /home/cambodia/public_html/gallery3/application/Bootstrap.php(67): Event_Core::run('system.execute') #13 /home/cambodia/public_html/gallery3/index.php(116): require('/home/cambodia/...') #14 {main}

DamienA Joined: 2003-05-25 Posts: 203	Posted: Mon, 2013-04-15 08:39
	I solved the import problem by changing the name of the module from multilang3 to multilang.

DamienA Joined: 2003-05-25 Posts: 203	Posted: Mon, 2013-04-15 09:05
	To get the module "working" I had to change the name of the module folder on my server from multilang3 to multilang. I discovered that with the folder renamed multilang would appear in the sidebar but: 1/ There is no contextual menu (multilang edit) that I can click on for each picture. 2/ The sidebar appears but the flag icons do not show up If I change the name back to multilang3 the sidebar disappears. So there seems to be an issue with paths, in my situation... Anyone have any ideas?

« first ‹ previous12